VVDI Prog New Update is Newest Version VVDI PROG Xhorse Programmer Tool. VVDI PROG Key Programmer With V4.9.4 Xhorse VVDI PROG Software Get Free BMW ISN Read Function and NEC, MPC, Infineon etc Chip Consequent. Original V4.9.4 Xhorse VVDI PROG Programmer With V2.1.0 VVDI Prog Firmware update timely.

VVDI PROG Key Programmer With V4.9.4 Xhorse VVDI PROG Software Get Free BMW ISN Read Function and NEC, MPC, Infineon etc Chip Consequent

VVDI PROG Xhorse Programmer Tool Original V4.9.4 Xhorse VVDI PROG Programmer With V2.0.0 VVDI Prog Firmware

 

Highlight of Xhorse VVDI PROG:

1. Multi-languages: English, Arabic, Czech, French, Italian, Polish, Portuguese, Russian, Spanish, Turkish, Chinese



2. Newest software: V4.9.2 Newest firmware: V2.0.0
    VVDI Prog V4.9.2 Software download for free(password:123456)
https://mega.nz/#!dM8DCSxZ!4wecu-jrUbFHYcgjV-X7JcjFAM6gPHbap1PvD-ha_7A
3.  Buy VVDI-Prog programmer, get free BMW ISN read function and NEC, MPC, Infineon etc chip continously update service



4. VVDI PROG=BMW ISN READ+EERPOM read+mcu read MOTO 9S12,5M48****+PIN Code Calculation(more pin coder Algorithm, than 40 type)
5. Support VAG EDC17 and BMW ECU
 
VVDI Prog Main Features:
 
1)The built-in update software allows user to update VVDIProg firmware timely.
2)High-speed USB communication interface enable the software automatically connect.
3)Smart operation mode: the possible causes of error will be listed
4)Reserve ports: for future update.
5)The self-test function enable you check if the machine works well.
6)Can supply power via USB cable, the software will automatically prompt if the external USB power supply is needed.

VVDI Prog Functions:
 
Support R&W lots of chips, include MC9S08 seri s, MC68HC(9)12 seri s, MC9S12 seri s, V850 seri s, H8X seri s, R8C seri s, PCF79X series
and most e prom chips etc . u Sup ort chip dat verify, check blank function
Support dat file compare function
Support R&W BMW N20, N5 ECU ( show ISN directly )
Stable R&W MC9S12XE seri s chips (5M48H/1N35H/2M53J/ M25J etc.)
Sup ort en w PCF79X remote, cur ently sup ort BMW E/F seri s
Lots of con ection diagram

Tips on using VVDI Prog:

1. VVDI Prog Update
2. You are offered to buy PCF79XX-Adapter,TF28xx Adapter for VVDI Prog
3. + Add KESSY(2008--) option in <4-IMMOBILIZER>->
  (Need to use with VVDI2, support Touareg, Bentley, A8, Cayenne,  Phaeton with kessy module (IMMO4 system) after 2008)
  If you can read by VVDI PROG, we can offer tech support for the cs/pin.
4.  Note: Just as the software update at a high frequency,so that we cancel the CD in the package,sorry for this.But do not worry,we will send you the download link when you place an order,or you can contact me for the newest version,Hope you can understand that!

How to update VVDI Prog programmer software and Firmware?

 1. Open VVDI Prog software
 2. Click “Upgrade” tab
 3. Then come to VVDIProg Update menu. You are able to check software version (Tip Information) and firmware version (Device Information).
 (NOTE: Newest VVDI-Prog does not need to update firmware)


 

VVDI Prog Software Latest Update:
 

VVDI PROG Latest Software Version V4.9.4 Update  (2020-05-26)

VVDI Prog V4.9.4 Free Download:
https://mega.nz/file/9BUWHIaa#tFvd0jE5p8XeEvP8TGnjDmRFNWY6zlmR19FYFJae_Ek

* This version DON't need update
  firmware
+ Add VVDI PROG USER MUNUAL 4.9.4
  version in Doc folder
+ Add R7F701330 option in
  <2-MCU-><RENESAS-RH850>  
+ Add FENGJUN-7 option in
  <5-DASHBOARD-><GREATWALL>
+ Add TOYOTA-RAV4 option in
  <5-DASHBOARD-><TOYOTA> 
+ Add BAOJUN-310/560 AIRBAG
 option in <7-AIRBAG-><SAICMOTOR>   
+ Add T300 AIRBAG option in
  <7-AIRBAG-><ZOYTE> 
+ Add NEW VISION AIRBAG option in
  <7-AIRBAG-><GEELY> 
+ Add BAODIAN AIRBAG option in
  <7-AIRBAG-><JMC>       
+ Add LYNKCO-AIRBAG option in
  <7-AIRBAG-><LYNKCO>   
+ Add SRS-VW62 option in
  <7-AIRBAG-><VOLKSWAGEN>  
+ Add AUDI-AC-CONTROLLER(R7F701548)
  option in <8-OTHERS-><AUDI> 
+ Add FRM-E-SERIES-XDT256
  option in <8-OTHERS-><BMW>
+ Add ESCORT-BCM option in
  <8-OTHERS-><FORD> 
+ Add 8th-SONATA-AC-CONTROLLER
  option in <8-OTHERS-><HUNDAI>
+ Add SKODA-RADIO-STREAM
  option in <8-OTHERS-><VOLKSWAGEN>

VVDI PROG software update to 4.9.2:
VVDI PROG latest software version V4.9.2 update
-------------------------------------
v4.9.2            (2020-03-16)
* This version DON't need update
  firmware
+ Add VVDI PROG USER MUNUAL 4.9.2
  version in Doc folder
+ Add STM32F405RG,
  STM32F405OG,
  STM32F405VG,
  STM32F405ZG,
  STM32F405OE,
  STM32F407VE,
  STM32F407ZE,
  STM32F407IE,
  STM32F407IG options in
  <2-MCU>-><ST-STM32>
+ Add FRM-E-SERIES-XEQ384-READ,
  FRM-E-SERIES-XEQ384-WRITE,
  FRM-F-SERIES-XEP100-READ,
  FRM-F-SERIES-XEP100-WRITE,
  FRM-F-SERIES-XET512-READ,
  FRM-F-SERIES-XET512-WRITE options
  in <8-OTHERS-><BMW>
+ Add ENVISION—TAILGATE-COMPUTER
  options in<8-OTHERS-><BUICK> 
+ Add PHAETON—TAILGATE-COMPUTER(2012)
  options in<8-OTHERS-><VOLKSWAGEN>

VVDI PROG latest software version V4.9.1 update
-------------------------------------
v4.9.1             (2020-02-19)
* This version DON't need update firmware
+ Add VVDI PROG USER MUNUAL 4.9.1version in Doc folder
+ Add ME17.3.0(ADAPTER) options in <10-BOSH-ECU-ADAPTER>-> 
+ Add MED17.1.10(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->   
+ Add EDC17CP54(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->  
+ Add EDC17C69(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->  
+ Add MED17.3.3(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->  
+ Add ME17.8.31(ADAPTER) options in
 <10-BOSH-ECU-ADAPTER>->
       
+ Add MED17.7.5(ADAPTER) options in
 <10-BOSH-ECU-ADAPTER>->
    
+ Add MED17.7.7(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->  
+ Add MED17.7.5(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->   
+ Add ME17.8.3.3(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->    
+ Add EDC17CP49(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->  
+ Add EDC17C76(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->  
+ Add MED17.1.12(ADAPTER) options in  <10-BOSH-ECU-ADAPTER>->
  
+ Add EDC17C79(ADAPTER) options in <10-BOSH-ECU-ADAPTER>-> 
+ Add EDC17CP52(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->    
+ Add ME1717.9.20(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->    
+ Add EDC17C70(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->    
+ Add EDC17CP42(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->  
+ Add EDC17C58(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->    
+ Add ME17.9.21(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->  
+ Add EDC17C83(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.9.9(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->  
+ Add MED17.8.32(ADAPTER) options in <10-BOSH-ECU-ADAPTER>-> 
+ Add EDC17C79(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->   
+ Add ME17.9.21(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->  
+ Add MED17.8.32(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->  
+ Add EDC17C79(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->  
+ Add MED17.3.4(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->  
+ Add ME17.8.3.3(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->  
+ Add MED17.1.27(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->    
+ Add ME17.5.24(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->  
+ Add ME17.5.26(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->

VVDI  PROG latest software version V4.9.0 update
-------------------------------------
v4.9.0             (2020-01-15)
* This version DON't need update
  firmware
+ Add VVDI PROG USER MUNUAL 4.9.0
  version in Doc folder
+ Add R5F100_Data_8KB_Read_SECURED
  options in
  <2-MCU>->
+ Add R5F10C/D_Data_8KB_Read_SECURED
  options in
  <2-MCU>->
+ Add R5F104_Data_8KB_Read_SECURED
  options in
  <2-MCU>->
+ Add AXELA options
  in<4-IMMOBILIZER>->   
+ Add LINGZHI-V5(2016) options
  in<5-DASHBOARD>-> 
+ Add TRUMPCHI-GS8(2017) options
  in<5-DASHBOARD>->
+ Add TIGUAN-L options
  in<7-AIRBAG>->  
+ Add G63-FAS(2019)
  options in<8-OTHER>->
+ Add G63-FAS-SWITCH(2019)
  options in<8-OTHER>-> 
+ Add MED17.7.1(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add MED17.7.3(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C66(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C10(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add MED17.0.7(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>-> 
+ Add EDC17CP47(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add EDC17CP62(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C57(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C58(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>-> 
+ Add MED17.9.3(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->  
+ Add EDC17CP55(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add MED17.9(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C60(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add EDC17CP42(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add MED17.4.4(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>-> 
+ Add MED17.9.63(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->   
+ Add EDC17C64(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->

VVDI PROG latest software version V4.8.9 update
-------------------------------------
v4.8.9              (2019-12-21)
* This version DON't need update
  firmware
+ Add VVDI PROG USER MUNUAL 4.8.9
  version in Doc folder
+ Add HYOSOW-S7 in
  <4-IMMOBILIZER>->
+ Add 820 in
  <4-IMMOBILIZER>-> 
+ Add S5 options
  in<5-DASHBOARD>->  
+ Add CROSS options
  in<7-AIRBAG>->  
+ Add AUDI-Q5-AMP options
  in<8-OTHER>->  
+ Add 205-LAMP-RH options
  in<8-OTHER>->  
+ Add 330-CABRIOLET-MODULE options
  in<8-OTHER>->   
+ Add F18-FZD options
  in<8-OTHER>->    
+ Add MED17.7.2(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add EDC17.7.2(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add EDC17.7.8(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add EDC17CP46(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>-> 
+ Add EDC17C45(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C56(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C50_Fxx(ADAPTER)options in
  <10-BOSH-ECU-ADAPTER>->  
+ Add MED17.3.5(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->  
+ Add MED17.9.30(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->  
+ Add EDC17CP50(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>-> 
+ Add MED17.8.3(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->   
+ Add MEVD17.4.4(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add ME17.1.6(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->

Xhorse VVDI Prog Programmer Software Update to V4.8.8.

VVDI PROG latest software V4.8.8 update
v4.8.8              (2019-11-12)
* This version DON’t need update firmware
* Fix ME17.5.22(ADAPTER) READ BUGs
+ Add VVDI PROG USER MANUAL 4.8.8 version in Doc folder
+ Add STM32F407VG, STM32F407ZG options in <2-MCU>-><ST-STM32>
+ Add CAS4-1L15Y-CERAMICS-NO-NEED- REMOVE-COMPONENTS, CAS4-1L15Y-METAL-NO-NEED-REMOVE-COMPONENTS PICTURE in <4-IMMOBILIZER>-><BMW>-> <CAS4-1L15Y>
+ Add CAS4-5M48H-CERAMICS-NO-NEED-REMOVE-COMPONENTS, CAS4-5M48H-METAL-NO-NEED-REMOVE-COMPONENTS PICTURE in<4-IMMOBILIZER>-><BMW>-><CAS4-5M48H-R/W/UNLOCK>
+ Add CAS4-5M48H-CERAMICS-NO-NEED-REMOVE-COMPONENTS, CAS4-5M48H-METAL-NO-NEED-REMOVE-COMPONENTS PICTURE in <4-IMMOBILIZER>-><BMW>-> <CAS4-5M48H-FORCE-UNLOCK>
+ Add CAS4-5M48H-CERAMICS-NO-NEED-REMOVE-COMPONENTS,CAS4-5M48H-METAL-NO-NEED-REMOVE-COMPONENTS PICTURE in<4-IMMOBILIZER>-><BMW>-> <CAS4-1N35H-BACKUP>
+ Add CAS4-5M48H-CERAMICS-NO-NEED-REMOVE-COMPONENTS,CAS4-5M48H-METAL-NO-NEED-REMOVE-COMPONENTS PICTURE in<4-IMMOBILIZER>-><BMW>-><CAS4-1N35H-R/W/UNLOCK>
+ Add CAS4-5M48H-CERAMICS-NO-NEED-REMOVE-COMPONENTS,CAS4-5M48H-METAL-NO-NEED-REMOVE-COMPONENTS PICTURE in<4-IMMOBILIZER>-><BMW>-><CAS4-1N35H-FORCE-UNLOCK>
+ Add MED17.1.62(ADAPTER) options in<10-BOSCH-ECU-ADAPTER>-><AUDI>
+ Add EDC17CP57(ADAPTER),
ME17.8.32(ADAPTER),
MED17.7.2(ADAPTER),
MED17.7.3.1(ADAPTER) options in
<10-BOSCH-ECU-ADAPTER>-><BENZ>
+ Add ME17.9.21.1(ADAPTER) options in<10-BOSCH-ECU-ADAPTER>-><HYUNDAI>
+ Add  MED17.7.2(ADAPTER) options in<10-BOSCH-ECU-ADAPTER>-><INFINITI>
+ Add ME17.9.21.1(ADAPTER) options in<10-BOSCH-ECU-ADAPTER>-><KIA>
+ Add ME17.9.52(ADAPTER),
EDC17C54(ADAPTER),
EDC17C74(ADAPTER),
EDC17CP44(ADAPTER),
ME17.1.1(ADAPTER),
MED17.1.1(ADAPTER),
MED17.1.6(ADAPTER),
MED17.1.21(ADAPTER),
MED17.1.61(ADAPTER),
MED17.5.21(ADAPTER) options in
<10-BOSCH-ECU-ADAPTER>-><VOLKSWAGEN>
+ Add TOYOTA_ME17.9.52(ADAPTER)options in<10-BOSCH-ECU-ADAPTER>-><TOYOTA>
+ Add EDC17CP48(ADAPTER),EDC

VVDI PROG software V4.8.7 update

v4.8.7              (2019-9-19)
* This version DON't need update firmware
* Fix BOSH ECU ADAPTER READ BUGs
+ Add VVDI PROG USER MUNUAL 4.8.7 version in Doc folder
+ Add R7F701062, R7F701064 ,R7F701067 options in
  <2-MCU>->
+ Add SCENIC(2007) options in<4-IMMOBILIZER>->   
+ Add E3 options   in<5-DASHBOARD>-> 
+ Add TIGGO5(2014) options in<5-DASHBOARD>->
+ Add 300(2005) options in<5-DASHBOARD>-> 
+ Add SOUTHEAST-DX3(2016) options in<5-DASHBOARD>->    
+ Add FRM-SRS options in<8-OTHER>->  VVDI PROG latest software version V4.8.2 update

Xhorse VVDI Prog V4.8.6 Update Support Read BMW ECU N20 N55 B38 ISN without Opening

Xhorse VVDI PROG software update to V4.8.6:

Xhorse VVDI PROG programmer released new software version 4.8.6.
————————————-
v4.8.6              (2019-9-02)
* This version DON’t need update
firmware
+ Add VVDI PROG USER MANUAL 4.8.6
version in Doc folder
+ Add ME17.5.22(TC1724)(ADAPTER),
MEVD17.2.4_Exx(N20)(ADAPTER),
MEVD17.2.4_Exx(N20)(ADAPTER),
MEVD17.2.4_Fxx(N20)(ADAPTER),
MEVD17.2.9_Fxx(N20)(ADAPTER),
MEVD17.2.9_Exx(N20)(ADAPTER),
MED17.5.25(TC1782)(ADAPTER),
MED17_5_22(TC1782)(ADAPTER),
MEVD17_2_3(B38)(ADAPTER),
MEVD17_2_K(B38)(ADAPTER),
MEVD17.2.5(ADAPTER),
MEVD17.2.8(ADAPTER),
MEVD17.2.H(ADAPTER),
MEVD17.2.P_Fxx(N20)(ADAPTER),
MEVD17.2_Fxx(N55)(ADAPTER),
MEVD17.2.G(N55)(ADAPTER),
MEVD17.2.6(N55)(ADAPTER)
options in
<10-BOSCH-ECU-ADAPTER>->
(Need BOSH ECU ADAPTER)
+ Add ME17.5.22(ADAPTER),
MED17_5_25(ADAPTER) options in
<10-BOSCH-ECU-ADAPTER>->
(Need BOSCH ECU ADAPTER)

Xhorse VVDI PROG software update to V4.8.5

Xhorse VVDI Prog programmer software update to v4.8.5  (2019-07-30)

This version don't need update firmware
Add VVDI Prog User Manual 4.8.5 in Doc folder
Add D70F4013, D70F4014, D70F4015, D70F4016, D70F4017, D70F4018, D70F4019 options in <2-MCU>-><RENESAS-V850>
Add Kuga-STAR-Q2 (2018) options in <5-DASHBOARD>-> <FOTON>
Add 408 (Front-Door-Module) options in <8-Other>-> <Peugeot>

VVDI Prog Adapters Detailed Description
 
16pin locking socket
 
Read the common EEPROOM, note: please insert the chip by following the below picture.



MCU Reflash cable
 
Used to program MCU on board



ECU Reflash cable
 
Used to program ECU



MC9S12 Reflash cable
 
Used to program MC9S12 series chip




Customer Feedback on VVDI Prog:
did a few tests today and this is what I found out.
It seems that VVDI prog reading speed is dependent on the processor speed of the computer.
 
CAS3 0L15Y flash read times
 
Centrino processor @ 1.6ghz Windows XP = 12mins
Core2 Duo processort @ 2.5ghz Windows 7 32 bit = 5 mins
i7 @ 4.4ghz Windows 7 64 bit = 2mins 30 seconds.
Other programmers do not seem to be affected by processor speed at all.
I also would of thought this was a fairly easy question to answer without me doing all the testing

VVDI Prog 4.4.0 on BMW cars
Cas 3 0L15Y read/write eep+flash ok
Cas 3+ 0M23S read/write eep+flash ok
Cas 2 2K79X read/write eep+flash ok
Program BMW CAS4+ All Key Lost…test ok
Read BMW CAS2, CAS3, CAS3+ and CAS4 ECU…test ok
Read BMW Engine ECU ISN…test ok
read out BMW 5 series CAS data
adds BMW CAS4 key
Can’t find a way to read Cas 1 for E65 mask 0K50E

VVDI Prog on Mercedes Benz
W211 ezs 4L40K read/write eep+flash ok

VVDI PROG programmer 4.1.4 on Great Wall, Delphi
Read Great Wall Delphi EEPROM 93C66…test ok
Read 5M48H and common 8pin IC…test ok

VVDI Prog 2.2.0 on VW
The programmer read VW 44 IC EEPROM
Calculate password

VVDI Prog on MCU Motorola 912Xd256
MCU Motorola 912Xd256 unsecured it
read ok
eeprom and flash write ok
wont write new data on
always says erase error
eeprom flash not

VVDI Prog Package including:




1. VVDI Prog device
2. EEPROM Socket
3. EEPROM Adapter
4. MC9S12 Reflash Cable V1(Used to program MC9S12 series chip)
5. MCU Reflash Cable
6. ECU Reflash Cable
7. USB B-Tyte Cable
8. TB28FXXX Adapter (Optional)
9. PCF79XX Adapter (Optional)
10. New M35080/D80 Adapter (Optional)
11. New EWS3 Adapter (Optional)
12. New EEPROM CLIP Adapter (Optional)
13. New EWS4 Adapter (Optional)
 
Difference between VVDIProg and VVDI2 Key Programmer

PS: simply says

VVDI Prog is mainly used to read and write chips
VVDI2 support diagnosis, key programming and odometer correction
VVDI2 and VVDIProg is perfect combination, they usually use together