V5.17 Kess V2 Master With K-suite 2.80 + V2.25 Ktag EU Clone Red PCB + GODIAG GT107 DSG Gearbox Data Adapter ECU IMMO Kit + Godiag GT105 OBD II Breakout Box. 4 in 1 Kess Ktag EU Clone With Red PCB With Godiag GT105 Breakout Box Plus GT107 DSG Gearbox Data Adapter Full Set.

V5.17 Kess V2 Master With K-suite 2.80 + V2.25 Ktag EU Clone Red PCB + GODIAG GT107 DSG Gearbox Data Adapter ECU IMMO Kit + Godiag GT105 OBD II Breakout Box

4 in 1 Kess Ktag EU Clone With Red PCB With Godiag GT105 Breakout Box Plus GT107 DSG Gearbox Data Adapter Full Set



Package Offer Hilight:

Comes with quality guarantee for all have passed quality control before delivery
Godiag GT107 Gearbox Data Adapter can help you to read and write data to the DSG gearbox.
Buy together can save a lot, We can offer you a lifetime customer service and tech support.

Godiag GT107 DSG Gearbox Data Read/Write Adapter

To read DQ250, DQ200, VL381, VL300, DQ500, DL501 gearbox TCU.
Compatible with Kess v2, pcmflash, pcmtuner, ktmbench
View More

Red KESS 5.017 Master Highlights

With the best PCB board
Software Version: V2.80 (Newest)
Fireware Version: V5.017
Update: By link
Car Models: For Multi-cars and trucks, no year limited
Multi-Language: English/ German/ Spanish/ Italian/ Portuguese/ French
Functions: ECU Programming Tool
Connection: By OBD2. Read and write ECU via OBD2 port directly, no need to disassemble ECU from the car, easy to use.
Support Protocol: OBD2, BOOT...
Full version: No limits, No reset button, Online Operation Supported, No tokens limited, no USB dongle
Operating systems: Windows XP, Windows 7, Win10, etc
Well tested by many users as well as our technology department, 100% workable, our best seller in 2020

Kess V2 V2.80 Free Download: https://mega.nz/file/p8swjI5Q#4LU_gOCzjvdPOvgJl2CfZB-WlTEM8CjRVc6tPbGIeRc
Ktag 7020 2.25 Software free download: https://mega.nz/file/MDwDWC5b#gro5UOF1aYvo cuEgXYtHzT4DTY1ueCJzvUSWDXlO_Q
Software of KESS V2 and KTAG should be installed on different laptops.

Kess V2 5.017 Firmware Red PCB




EU Version Red PCB New 4 LED KTAG 7.020 Firmware Latest V2.25

KTAG V7.020 Highlights:
Hardware Version: V7.020 Software Version: V2.25
Alientech Master Version ECU Programming Chip Tuning Tool
No Tokens Limited, Unlimited Version, Online Version
Update: By CD or Download link only
Support BDM Function Well, No Checksum Error
Support both Car, Truck ECU Programming
Available Protocols for K-TAG: BDM MOTOROLA MPC5xx
Languages: Italian Dutch English French Portuguese Spanish
A true champion of innovation, K-TAG introduces another brand new novelty to the Alientech world: J-Tag communication for Asian vehicles

Very Important Tips:

1. Please DON'T update the KTAG online, it will damage the Unit, and can not use anymore. (You have to send back to repair, so please pay more attention)
2. Please DO Close anti-virus program when you run software
3. PC Recommended: Windows XP Professional/Win7/Win8/Win10

KTAG 7.020 add new color GPT Cable for GPT Function:

GPT is new password cryptography that is implemented in new Tricore microcontrollers. our KTAG v7.020 can easily read and decrypt the secret password and it automatically unlocks/unprotects the Tricore sectors so it can read and write both Flash and Eeprom

PCB Pictures for KTAG ECU Tool





Used with KESSV2 DQ200, DQ250, DQ500:



Steps:

1. Connect Godiag GT107 to gearbox ECU DQ250, DQ200, DQ500.
2. Connect the Godiag ECU IMMO Prog AD with the vehicle battery or 12v 3A power supply. (The Godiag ECU IMMO Prog AD’s IMMO button must be up.)
3. Connect kessv2 device, and press down the GT107 switch and it will be in “Manual” ignition mode.
4. Press down the 120 ohm resistor switch.
5. Connect the computer and open the software to read and write data.
Work BOOT: use a direct connection to the connector of the control UNIT, the switching power supply is carried out either manually (recommended) or by using the scheme of automatic power control, GODIAG GT107 DSG gearbox data adapter (same PowerBox or converted from KESS). In case of manual control, the entrance to the boot mode may not happen on the first attempt.


Read DQ500: only when connected directly!
NOTE: the power supply must be switched manually, while only the ignition must be switched on or off (pin 15), the second contact must be connected constantly.

Package List:

1set x Kess v2 V5.017 ECU Programmer
1set x KTAG V7.020 ECU Programmer
1 set Godiag GT105 breakout box
1 set Godiag GT107 DSG gearbox adapter