Genuine Tango Key Programmer With Basic Software is best transponder key programmer for vehicle immobilizer. Tango Transponder Programmer With V1.112 Tango Download Software Supports Daihatsu G Chip Function. Original Tango Key Programmer Tango Key Tool update online frequently and for free.

 Genuine Tango Key Programmer With Basic Software Tango Transponder Programmer With V1.112 Tango Download Software

  Genuine Tango Key Programmer Tango Key Tool update online frequently and for free

Tango Key Programmer V1.121 is best transponder key programmer in the world, can be used to cover, read, write and generate the latest transponders used in the latest vehicle immobilizer technologies. Tango Key Tool update online frequently and for free.

Tango Key Programmer With Basic Software Highlights:

1. Latest Version: V1.121
2. Update: update online for free
 3. Original make, with high quality and one year warranty

Tips on using Tang Transponder Key Programmer:

1. About the Tango software update free or charging 
The tango software update is free, due to the device is orginal ,after you get the device, you should contact  the factory to update one time within 28 dyas, otherwise will be locked .If you want activate special function or special car, that need charge .
2.After generating a new transponder with TANGO Programmer, you no need any additional diagnostic equipment! It will start the car directly, even on new FIAT CODE 2 system, also used in PSA Group vehicles!Only you have to write the new file back into the immobilizer system!
3. Tango Key Tool car list
4. For the customers who has add G Chip Function Authrization, can only generate 10 G Chip every day.

Original Tango Transponder Key Programmer supported transponders list:

Philips transponders: 
PCF7930-31 writing, reading
PCF7935 writing, reading, shadow memory, crypto calculator
PCF7936 writing, reading, modes password, crypto, Manchester & Biphase encodings
PCF7941 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7942 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7943 transponder, remote, Manchester & Biphase encodings
PCF7944 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7945 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7946 transponder, remote, Manchester & Biphase encodings
PCF7947 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7952 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7961 transponder, remote, Manchester & Biphase encodings
*Auto switching between PCF7936-PCF7961 windows if invalid type detected.
*Autodetect manchester / biphase

Temic transponders:
Temic 11 reading,writing to T5
Temic 12 reading,writing to T5

Megamos transponders:
Megamos (13) reading,writing to T5,emulating on PCF7930-35
Megamos (48) reading,writing,PIN,unlock by PIN,full range of memory contents,crypto calculation
Megamos CRYPTO-2 (8E) read ID,read/write EEPROM,write Cryptokey

Texas transponders:
Tiris (4C) reading
Tiris (4D) DST crypto reading, writing, crypto calculator
Tiris (4E) DST crypto reading, writing, crypto calculator
Tiris (8C) reading

Atmel:
TK5551M (T5 replacement)
SAAB reading , writing to T5
The product is in working out stages, therefore the list of the supported transponders will be developed later.

Key maker usage.
Key maker usage consists of a four steps. The 4-th step is additional and depends on a vehicle model.
1. Open an immobilizer dump file.
2. Choose number of the key you want create.
3. Place a transponder into the coil and click the WRITE button.
4. In some cases the program asks you to save a modified immobilizer dump. This dump must to be written into the immobilizer.

First of all, take a look at this picture.  The "Loaded File" window displays the immobilizer file name. Ensure that a valid dump is stored. The "Maker" window displays selected maker name. Ensure the right key maker selected.

The "info" windows display an important information:
1. Original transponder---Informs you about type of the original transponder
2. Allowed transponder---Informs you what type of transponders is suitable for the key maker
3. Data location---The immobilizer memory may be stored in various chips, the description informs you about from where you have to read a dump. Some immobilizers can have various chipsets. In this case the field displays several possible chips. Find one of them inside of the immobilizer and read it.
4. Data size---Each chip has certain memory size, the key maker accepts files with the described size.
5. Data format---This field appears in case of 93CXX eeprom seria.

There are two standards of data layout:
Intel format and Motorola format or Little Endian and Big Endian respectively.
The data layout depends on a chip-programmer that is used for eeprom reading.This field informs you what kind of format is suitable for the key maker.Usually you can see that both formats are suitable. It means that the program can understand any data layout.
 

How to use Tango Key Programmer

Firstly, run the key maker interface according to the vehicle and read information in the "Info" window. Watch theData location field describes the memory chip. Find out the chip inside of the immobilizer and read it. Save the read data (dump).
Click the "OPEN IMMOBILIZER FILE" button and load the saved dump.
The program will analyse the dump.
If the dump is correct the "WRITE" button will become active and the "Keys" window will display the range of key numbers that ca