Actia Mercedes Benz Xentry Diagnosis VCI can work new 07/2018 Mercedes Xentry Diagnosis Open Shell Software. Original Mercedes Xentry VCI includes only the Xentry Diagnosis VCI scanner and OBD-II cable. Mercedes Benz Xentry Diagnosis Kit 3 Multiplexer Firmware upgraded to version 03 2018 with new DoIP protocols.

Actia Mercedes Benz Xentry Diagnosis VCI Original Mercedes Xentry VCI Mercedes Benz Xentry Diagnosis Kit 3 Multiplexer

Original Mercedes Xentry VCI includes Xentry Diagnosis VCI scanner and OBD-II cable

Mercedes Benz Xentry Diagnosis Kit 3 support all Mercedes models in full and it Communication with PC via Wi-Fi or USB cable.

The Mercedes Benz Xentry Diagnosis Kit 3 includes only the Xentry Diagnosis VCI scanner and OBD-II cable. Other cables are not supplied.

This is the Original Mercedes Xentry VCI:

Xentry Diagnosis VCI Mercedes
Original
Firmware upgraded to version 03 2018
A little bu. (state close to new)
Included is a compatible usb-wifi adapter and an OBD cable.
Works great with Xentry Diagnosis Open Shell
 
Original Mercedes Xentry VCI belongs to the latest generation of dealer diagnostic scanners for Mercedes cars. The device was developed by Bosch. In view of the fact that the idea of ​​placing all diagnostic software in the "head" using the example of Xentry Connect 5 (the fifth old) failed, it was decided to develop a completely new device with a new circuitry, which will be only a gateway executor running a laptop installed software . It should be separately highlighted the ability of the device to work with the car under the new DoIP protocols. If you want to work with the newest cars of the current year, then you should buy Xentry Diagnosis VCI.

Like previous scanners for computer diagnostics Mercedes, Mercedes Benz Xentry Diagnosis VCI Multiplexer supports a full range of service functions such as reading and deleting trouble codes, activations, coding, performer tests, programming and block coding, full DoIP support.

Dealer scanner Mercedes XENTRY VCI comes in a compact rubberized case, does not have batteries, fans and display on board. An external power supply is not required, power supply is made from a diagnosed vehicle.

What are the prospects for Xentry Connect and Xentry Diagnosis VCI:

Xentry Connect, a Mercedes dealer of the current generation, is removed from production: it is replaced by Xentry Diagnosis VCI from Bosch. Perhaps, Xentry Connect will be the last product of the Actia for Mercedes Benz. Unfortunately, Xentry Connect has become one of the most unsuccessful multiplexers for Mercedes diagnostics.

The new Xentry Diagnosis VCI is fundamentally different for the better from its predecessor:

easy and convenient, without built-in PCs and hard drives inside, no fans, battery and display

You do not need to constantly update the internal firmware, no external power required

Specifications:

 Clock rate     800MHz
 RAM     512 MB DDR3 RAM
 ROM     512 MB Flash
 Mass storage (opt.)     USB Memory Stick
 User interface     
 LEDs     5 status LEDs
 Acoustic signal beeper     acoustic signal

Power supply:

 From the vehicle battery via the diagnosis connection cable
 or via a connected USB cable     8 V to 28 V

Important:     

 Diagnostic socket of a vehicle must be secured
 with a fuse of maximum 6 A / 32 V.
     
Mechanical properties:

 Dimensions     168x115x45 mm
 Weight     0.41 kg  
 Power supply     750 mA  
 Input voltage (fail-safe)     8 to 28 VDC
 Operating temperature     -20 С0  - +60 С0
 Storage temperature     -40 С0  - +80 С0
 Humidity at 25 С0      30 % - 95 %
 Makimum operating height     4000 m  
 Protection class, diagnosis connection cable not plugged in     IP 30
 Protection class, diagnosis connection cable plugged in     IP 54  
 Diagnosis connection cable     
 J1962 (ISO 15031-3)     26 pins  
 Certification     
 VCI     FCC, CE, RoHS